As Compared to the wheeled vehicles, legged robots are more capable to move across rough surface. The objective of this project was to design and implement a legged robot with RC servo motors operated by IR remote control. The robot should be able to walk straight ahead and make turns. Each leg of the robot was made up of servos. For operating servos we are using Arduino Mega smart board. This board would convert the number to a pulse-width modulated signal. Depending on the width of the pulse, a servo would rotate between 0 to 270 degrees.

The structure of the robot was designed in such a way that it was used to coordinate motion of legs because it guaranteed that the robot would not fall over while walking. To save power, legs of the robots were designed such that they could lock up in a stand-up position without consuming any power.

Designed By:

– Syed Zulfiqar Ali Zaidi (GL) 11ES46

– Tur Ali Sina Khan 11ES59

– Ali Akbar Shah 11ES20

– Zeeshan Samo 11ES138

– Sundar Lal Lohana 11ES51

– Faraz Ahmed Bhatti 11ES110

Supervised By:

– Engr. Kamran Kazi

Co-supervised By:

– Engr. Azam Rafique

4 Responses to “Pet-Bot”

  1. February 28, 2015 at 4:09 pm

    Its really appreciate it.simply best

  2. February 28, 2015 at 5:25 pm

    dear awesome work, it should be promoted and highlighted on media, as some other FYP of mechanical students previously show cased a project of mechanical car on media, certainly, by coming on media it will further shine our university’s name

    • February 28, 2015 at 5:50 pm

      yes you are right…projects of mechanical department will be published soon and electric car will be our next project to display on the site and social media as well.
      Thanks for your kind response.

  3. March 1, 2015 at 8:15 am

    hats-off work

Leave a Reply

Comment *


Latifabad Hyderabad Pakistan 71000



Copyright © 2014 - All Rights Reserved Designed and Developed by MUETTECH GROUP

Join me: